Greenwood Village Auto Repair

All new passenger vehicles on our Centennial, Colorado, roads now have tire pressure monitoring systems – TPMS for short. They are designed to alert you if your tires are underinflated. Since they are fairly new, a lot of people have questions about them.First off, the most important thing is that you still need to check your tire pressure every week – or at least every time you gas up. The TPMS system alert comes in when your tire is 20 percent below the factory recommendation. So if the recommended pressure is 34 pounds per square inch, the TPMS warning won't come on until the pressure is at 28 pounds. That's significantly underinflated, enough to raise safety concerns.The worst is tire failure. A severely underinflated tire can overheat and fail. Also, handling degrades to the point that you may not be able to steer out of trouble. Also underinflated tires wear out faster and they waste fu ... read more

Flats, blow outs, skids and longer stopping distances can all be the result of driving around Centennial on underinflated tires. Admittedly, it's hard to tell when a radial tire is underinflated. If your vehicle manufacturer recommends 35 pounds of pressure, your vehicle tires are considered significantly underinflated at 26 pounds. The tire may not look low until it gets below 20 pounds.New laws require all vehicles to include a tire pressure monitor system, or TPMS. This technology has been used by race car drivers for years. They are able to head off problems from underinflation by closely monitoring tire pressure on the track. It's up to your vehicle's manufacturer to determine which of many TPMS systems available they'll use to comply with the law.Obviously, all of this doesn't come free for Centennial drivers. Government studies have estimated the net costs. Of course, the TPMS system itself will cost something. Maintaining th ... read more

Why are wheel bearings for Centennial vehicles important? It's simple: your wheel bearings keep the wheels on your vehicle. In today's Davis Automotive Repair post, we'll discuss more about wheel bearings and how you can make sure they can do their very job while you drive around Centennial, Colorado. Wheel bearings are pretty simple parts. They're made of high quality steel and are engineered to last 100,000 miles (160,000)  or more if properly cared for. The bearings do two jobs: First, they allow the wheel to freely rotate with as little friction as possible. Second, they support the weight of the vehicle. For example, if your car weighs 3,600 pounds (1600 kilogram), each wheel has to support approximately 900 pounds (400 kilograms). That's a lot of heavy lifting over those long distances.Even though wheel bearings are pretty straightforward, they need to be in near perfect condition to do their job for Centennial vehicles. The bearings are packed with heavy gr ... read more

Tires do a lot of work for Centennial drivers. They transfer engine power and braking forces to the road; they handle steering control; and they cushion all those bumps and jolts while driving around Centennial. They also support the entire weight of the vehicle, including you and your passengers. With such important work to do, you want your tires to do their job well. And since replacing tires is fairly pricey, you want them to last as long as possible. There are three keys to long, even tire wear for Centennial driving: Proper tire inflation Proper wheel alignment Regular tire rotation and balancing The front tires on a car take the brunt of the steering forces. As they push through turns, the shoulders of the front tires wear down more quickly than the rear tires. Rotating front and rear tires allows them to all wear at about the same rate. That's especially true of front-wheel-drive vehicles whose front tires steer and put the power to the road.SUVs ... read more